How to maintain and use these new equipment

As the new high-speed machine speed is faster, so the plait should try to use a speed ratio of about 24 teeth, in order to reduce the speed of the plait reducer, avoid the change of needle pitch caused by the high temperature of the plait, reduce the wear of the plait, roller and other parts; At the same time, it is also necessary to improve the manufacturing accuracy of the flower plate, precisely adjust the transverse time, and use lubricating oil in strict accordance with the requirements of the lubrication instructions, including oil products, dosage, cycle, etc., while paying attention to checking the oil circuit, and oil filter. A kind of warp knitting machine whose structure is characterized by an Angle above 140° between the pulling direction of the fabric and the plane of the needle bar. Commonly used to weave curtains, tablecloths, bed covers, blankets, lace ribbons, women's inner outerwear, fishing nets, bags and other more complex warp knitted fabrics. The common machine number of the Raschel machine is 10-48 needles /50.8 mm, up to 64 needles /50.8 mm. The widths currently in use range from 1900 to 6600 mm (75 to 260 in), with the widest reaching 9650 mm (380 in). Raschel machines commonly use tongue needles, and some machines initially use slot needles. In the history of warp knitting machine, mechanical traverse mechanism has long occupied a dominant position, but with the electromechanical integration of needle textile equipment, precision machinery and advanced microelectronics technology organically combined, electronic comb traverse mechanism has developed rapidly. The electronic comb traversing mechanism has the advantages of convenient changing pattern, large traversing distance, wide pattern design space and high production efficiency. In addition, because it is based on electronic computer control, it has a very important meaning for the electromechanical integration of the warp knitting machine.