Definition of machine number for warp knitting machine

The machine number of multi-comb warp knitting machine is generally E14, E18, E24. Only the MRE32/24SU is numbered E28. The machine numbers of the Jacquard warp knitting machine are sometimes denoted as E6/12, E7/14, E9/18 and E12/24. This means that the ground comb is in full number configuration, while the Jakar comb is in half number configuration. In addition, in the RJWB series, the number is denoted as E24/12, which indicates the full number configuration of the ground comb and the half number configuration of the Jakar comb.

The structure and principle of the warp knitting machine The main knitting machine parts of the warp knitting machine are knitting needle, yarn guide needle, settling sheet and pressing plate (for crochet machine). The knitting needles are arranged in a row on the bed and move with the bed. The guide needle is mounted on the strip to form the comb. The warp passes through the hole of the yarn guide needle, moves with the comb and winds on the needle, and weaves the fabric through the mutual movement of the knitting needle, settling sheet and other ring forming parts. The warp knitting machine is mainly composed of knitting mechanism, comb traversing mechanism, letting off mechanism, drawing and winding mechanism and transmission mechanism.

Before running the machine, check whether the warp knitting machine meets the operation technical requirements, and only after meeting the requirements can it be started and started. Safety workers and gear guards should be familiar with and understand the technical operation requirements of the varieties opened by this machine. Check whether the disc head of each rear axle is clamped, and there is no fixed point affecting the operation of the warp shaft.